C Band SSPA 10W~1KW Series
Online consulting: 
- DESCRIPTION
- TECHNICAL
- SPECIFICATIONS
Product description:
C-Band solid state power amplifier, C band TWTA can be used in satellite communication ground station, data link, measurement and control, electronic warfare and other fields. It also can be used as a single component, or adopted phase synthesis to obtain higher output power to replace the traveling wave tube amplifier. Product frequency coverage from 5.8Ghz to 8.5Ghz, the output power range from 10W to 1KW. The product is suitable for ground, vehicle, carrier, airborne, etc.
Product Feature
The series of solid state power amplifier products integrated monitoring system, power supply system and cooling system. Built in monitoring system to provide forward / echo output power detection, temperature detection, remote switch machine, over temperature protection, VSWR protection, real-time monitoring of power amplifier voltage and current function. The monitoring system is communicated with the terminal computer through the serial port RS485/422/LNA, and all the test data are displayed on the computer terminal in real time.
The high power amplifier series products can replace a hundred watt traveling wave tube (TWTA) to solve the localization problem.
The output power can be customized according to customer requirements, continuous wave output power up to 1KW, the need for higher output power, greater bandwidth please kindly contact us.
Ability Description :
1、Experienced R&D engineer team;
2、Powerful RF design&simulation software and testing facility;
3、Customized L/S/C/X/ku/K/Ka/V/Q/W band MMIC SSPA, MMIC SSPB, MMIC HPA;
4、Ultra wideband products is avaliable;
5、Ultra output power capacity is avaliable;
6、Meets for EMC(Electro Magnetic Compatibility) testing,Satellite communication,Radar system requirements;
7、CW(continous wave) and PW(pulse wave) is avaliable;
8、SSPA,SSPB,HPA, Power amplifier modules is avaliable;
9、Up converter modules is avaliable
SSPA Feature
Output power range:10W~1KW
High linearity
Remote control via RS485/422 or Ethernet
Forward and reverse power detection
Output sampling
Protection against over temperature
Integrated band filter
Products can be used outdoors
Option:
1:1 or 1:2 Redundant Configuration
Adopted phase synthesis system for higher power input
L band input(SSPB/BUC type)
Harmonic filter
General Technical Index
|
Operating Frequency |
5.85～6.75GHz /5.9～6.4GHz/7.7～8.5GHz |
|||
|
Output power |
10W～1KW |
|||
|
Gain |
60dB |
|||
|
Gain adjustment range |
20 dB in 0.2dB steps |
|||
|
Gain flatness (full band) |
± 1.5 dB max. |
|||
|
Gain flatness (40MHz) |
±0.3 dB max. |
|||
|
Gain variation over temperature |
±2dB max |
|||
|
Input VSWR |
1.5:1(max) |
|||
|
Output VSWR |
1.5:1(max) |
|||
|
Spurious |
-60 dBc max. |
|
||
|
Harmonics |
-40dBc@P1dB |
|
||
|
AM/PM conversion |
4°/dB@P1dB（max） |
|||
|
Three order IMD |
-25dBc at 4dB total back-off from rated P1dB |
|||
|
Group delay |
1nsec p-p max |
|||
|
Phase noise degradation |
2dB（max） |
|||
|
Noise power density |
－70dBW/4kHz（Transmit Band）；-150dBW/4KHz（Receive Band） |
|||
|
Power supply |
220VAC/48VDC/28VDC |
|||
|
Cooling system |
Cool air/cold liquid (optional） |
|||
|
Interface |
RF input |
|
SMA-F |
|
|
RF output |
|
N-F or waveguide |
||
|
RF output sampling |
|
SMA-F |
||
|
Communication and control interface |
|
Navigation plug |
||
|
Power supply interface |
|
Navigation plug |
||
|
Environmental |
Operating temperature |
|
-40℃ ~ +55℃ |
|
|
Storage temperature |
|
-55℃ ~ +88℃ |
||
|
Humidity |
|
5% to 95% non-condensing |
||
|
Can meet Vehicle / carrier / airborne requirement |
||||
