AC2000 antenna Control system(AC Control System)
The Pobecom Model AC2000 Antenna Control Unit enables satellite earth station antennas to accurately track geostationary and Inclined orbit satellites up to 10 degree.
AC2000 antenna control system is based on windows operation system and IPC structure. The system has high reliability, and maximum flexible system configuration. Easy operation and human interface.
This system using dual channel brushless Resolver to ensure the drive and tracking accuracy.
The system is remotely controllable over Ethernet via TCP/IP or various serial ports (, RS-232, RS-485.)
◆Two speed driver(high for slew ,Low for tracking)
◆TFT LCD display
◆Keypad and Mouse control
◆dual channel brushless Resolver
◆50 Satellite Positions Preset
◆Three Axis Control for Az and EI .Polarization as a option.
◆Big screen display of alarm, antenna position and fault indication.
◆Software and hardware travel limit switches ensure the safety operation.
◆Remote control over Ethernet or Various serial port
◆Easy upgrade the software
◆high scalability for ACU and ADU
Modes of Operation
◆ ORBIT PREDICTION TRACKING (OPT)
◆ STAR TRACKING
Better than 10% receive 3dB beamwidth RMS in Step Tracking
Nominally 5% receive 3dB beamwidth RMS with OPT Tracking
Position display resolution：0.001°
Controls / Interfaces
Front panel Local control
Remote: Ethernet, TCP/IP
Serial: RS-485, RS-232
Receiver Interface: 0-10 VDC
ADU: Standard Drive Interface
Alarm: Summary output
Temperature: 0 to 50° C
Humidity: 95% non-condensing
ACU: 100-240 VAC,47-63 Hz 100 W typical
ADU: Motor Size: 1-5 HP standard
Larger sizes available
ACU:Height: 5 Rack Units
ADU: Height: 1000mm